Selectronic SP PRO SPLC1202-AU 20kW, 120VDC

INV-004747-SEL

Description

Description

Whether the grid is at your doorstep or 1000km away, the SP PRO BiDirectional Inverter charger can control and manage every aspect of your energy needs. By incorporating PV Solar, Wind, Hydro or a Diesel Generator, you can be sure you will never be without power.

Features & Benefits
Solar Hybrid (On Grid), Off Grid or Mobile and Marine operation
Integrated Grid controller, choose from Self Consumption, Battery Storage or cheap electricity rates
Integrated intelligent Generator controller, maximise system efficiency
Minimum 63A transfer switch allows entire home to be connected
Compatible with AC Coupled PV, reduces install costs with higher efficiency

 

Specifications

Specifications

Technical Data  
AC OUTPUTS SPLC1202
Maximum AC Load Power from batteries:    
30 seconds  38.0 kW
1 minute  35.0 kW
30 minutes  30.0 kW
60 minutes  24.0 kW
Continuous  20.0 kW
Nominal voltage Off Grid 240 V AC configurable 210 to 240 V AC
Total harmonic distortion Off Grid <3% @ 0-200% rated load
Frequency Off Grid 50 or 60 Hz +/-0.005% No Grid
AC INPUTS  
Nominal voltage 210 +/- 15% to 240 +/- 10% V AC
Nominal input frequency 50/60Hz configurable +/- 1% to 10%
AC transfer current capacity 125 A  / 30 kW
Max AC input source, (Generator or Grid) 30 kW
AC transfer time typical < 1/2 cycle
Max charging from Grid or Generator 20.0 kW / 166 A
DC INPUTS  
Rated DC input / DC voltage range (V DC) 120 V / 100 - 170
Battery capacity (range) up to 10, 000 Ah
EFFICIENCY  
Peak Efficiency 97.20%
DC consumption: idle 6 W
GENERAL  
Disconnect time if Grid (AC source) fails < 30 ms
DC Circuit Breakers internal 2 pole 250A
Operating Temperature Range -10 ˚C to 60 ˚C
Inverter display indicators charger status, charge source, usable battery capacity remaining, alarms, AC status.
Renewable charging source Managed AC coupling with any Selectronic Certified single phase inverter, DC Renewable charge controller or generic AC coupled
Data logging storage Up to 2.5 years
SP LINK configuration and monitoring software Included as standard
Ambient temperature operating range -10˚C to 60˚C
FEATURES  
Generator Backup Inbuilt for off-grid systems
Battery temperature / Mid point battery voltage Yes / Yes
Battery Compatibility Highly configurable battery charging set points allow integration with many battery chemistries including lithium.
Control Inputs 4 of, 12V to 60V True, < 3V False
Shunt Inputs Two user definable: Suitable for 25 A - 1000 A current shunts at 25mV - 100mV
Relay Control Outputs Relay: 4 of 60 VDC, 500 mA / Digital: 3 of 60 VDC, 5 mA
Communication Port 1 USB (slave) or RS232 (adjustable baud rate of up to 115200)
Communication Port 2 RS485 or RS232 (adjustable baud rate of up to 115200)
Dual, Split & Three Phase compatible Yes with an SP PRO AU on each phase
Warranty 3 - 10 years (conditions apply see website for details)
STANDARDS  
Safety - Uninterruptible Power Supply (UPS) IEC 62040-1-1:2002 / AS 62040-1-1:2003
Safety - Power converters used in PV Systems IEC 62109-1 and IEC 62109-2
EMC (Industrial limits) EN 61000.6.4:2007
Grid Connect AS4777.2:2015
Certification Certificate of Suitability, Ctick
Protection IP43
WEIGHTS & DIMENSIONS  
Weight: Packed / Unpacked with wall mount 163 kg / 115 kg
Dimensions: Packed / Unpacked h x w x d (mm) 1080 x 740 x 650 / 870 x 540 x 290

Download

To top